Dating adding machines
The distance from the needle may be adjusted by sliding the guide from left to right.This clear plastic foot raises and lowers with the needle to allow fabric to be moved between stitches and to hold fabric in place while stitches are created.The Fringe foot is a good tool for creating 3-D flowers, heirloom seam joins, surface texture and custom trims with a simple zig zag stitch.This foot was originally designed and used to mark construction details by creating tailor tacking, so feel free to use it as a great marking too as well!Measure and finish fabric edges with straight or zig zag stitches. Its position can be adjusted exactly on the edge of the zipper/piping, avoiding the non-flat parts of them. Stitch guide for utility and embellishment projects. Horizontal opening for wide range of left to right needle positions and added sole pressure.Centered post for consistent stitch formation over fabric edge. It also presses the fabric with just the right pressure. Adjustable guide to accommodate varying piping dimensions. Great for adding a little glitz with sequins or pearls as well as couching larger cords. Use Quilting Guide for Foot Holder's Quilting Foot Guide (inserted on left or right side of foot) for accurate stitch placement.The walking foot is a moving feed system that holds and moves fabric between the presser foot's upper feed dog and the machine's lower feed dogs to better control difficult fabrics as well as multiple layers of fabric.The walking foot is great for sewing when matching prints or plaids or when fabric drift is an issue or quilting.
Adjustable, open-toed guide makes this a great foot for both embellishing and utility stitching, works with straight and decorative stitches.
Accurate reference marking on 3 sides of foot for visibility and accuracy.
Single hole foot prevents fabrics from sinking into feed dogs.
Walking Feet are not for use in reverse or side to side sewing as well as some built-in stitches that include other than forward movement of the feed dogs.
Adaptor for low shank attachments Some screw on feet will not have adequate height to be used with some of our embroidery/sewing machine's presser bar.